← Back to 

EUL-SR-LED LED elevated approach side-row light by Airsafe, angular view showing yellow aluminium body with red LED diffuser

EUL-SR-LED

LED Elevated Approach Side-Row Light

Manufactured by Airsafe.

The EUL-SR-LED is a LED elevated approach side-row light designed for airport approach lighting systems up to CAT III, in compliance with ICAO Figure A2-2. Built on a high-strength aluminium alloy body with excellent thermal dissipation and a reduced-height profile to minimise jet blast impact, it delivers a steady red beam with saturated LED colour at all brightness levels and viewing angles.

The LED light source provides a comprehensive lifespan of not less than 100,000 hours with light attenuation below 30%, and a minimum of 60,000 hours at maximum brightness. With a consumption of just 17 VA and fully compatible with existing series circuits and 45W isolation transformers, the EUL-SR-LED is a direct upgrade from conventional halogen approach side-row fixtures.

Aplicattion / Use

LED elevated approach side-row light for airports CAT I, II y III, according to ICAO Fig A2-2

Compliance with standards

  • ICAO Annex 14, Vol I
  • FAA AC 150/5345-46
  • EB 67 D
  • IEC-TS 61827
  • EASA CS-ADR-DSN
  • STANAG 3316
  • AENA PPT-015_06-12

Data Sheet
Download

Certificate
Request Certificate

TECHNICAL SPECIFICATIONS:

Parameter Value
Product code EUL-SR-LED
Type LED elevated approach side-row light
Application Approach side-row barrettes — CAT I, II & III
ICAO reference Figure A2-2
Power supply 2.8A to 6.6A series circuit, per FAA EB67
Light source LED
Beam colour Red
LED lifespan ≥ 100,000 h (light attenuation < 30%)
Avg. life at max brightness ≥ 60,000 h
Consumption ≤ 17 VA
Power factor ≥ 0.9
Dimming regulation Regulated light output
Ingress protection IP67
Body material High-strength aluminium alloy, anti-corrosion treatment
Hardware Stainless steel
Diffuser Glass, high temperature and abrasion resistance
Thermal management Integrated, finned aluminium body
Electronics protection Encapsulated in epoxy resin
Surge protection Integrated
Monitoring Optional «Fail Open» device
Isolation transformer 45W
Lamp fault detection Optional (order code M)
Mounting Extension pole, 12″ deep base, approach mast
Ask about this product

If you have any questions about this product, you can call to +376 665 572 or leave your contact information and we will contact you.

Trataremos tus datos para responder tu consulta. Si aceptas, recibirás comunicaciones comerciales sobre nuestros servicios. Puedes ejercer tus derechos de acceso, rectificación, supresión y oposición, entre otros, según nuestra Política de privacidad.