Power Supply & Control
Power Supply
AES introduces his new series of Microprocessor controlled Constant Current Regulators using the latest technology.
AES Switch mode constant current regulator Type CCR-2100S
Features:
Features:
AES Switch mode constant current regulator Type CCR-2100S
Features:
- True sinusoidal wave output, low harmonic output.
- High regulation precision and response dynamic thanks to high frequency PWM – IGBT technology.
- DSP and ARM microprocessor embedded processing control.
- Fully digitalized high precision control and regulation, via parameters processed in a numerical way to overcome affection by temperature, voltage or other physical parameters.
- Natural air cooling for all ratings
- Adaptable to circuit configurations consisting of non linear loads like new technology LED lights and taxiway signs with light sources other than halogen lamps.
- Remote network control, monitoring and diagnostic functionality.
- An integrated menu driven human machine interface (HMI) allowing full configuration on-site without any additional equipment.
- Single phase power supply.
- Standard built-in lamp fault detection.
- Optional earth fault detector and lightning arrestor.
Features:
- Full digitally controlled and regulated CCR.
- High constant current precision and high reliability.
- DSP and ARM microprocessor embedded processing control.
- Fully digitalized high precision control and regulation, via parameters processed in a numerical way to overcome affection by temperature, voltage or other physical parameters.
- Suitable to circuit configurations consisting of non linear loads like new technology LED lights and taxiway signs with light sources other than halogen lamps.
- Remote network control, monitoring and diagnostic functionality.
- Integrated menu driven human machine interface (HMI) allowing full configuration on-site without any additional equipment.
- Standard built-in lamp fault detection.
- Optional earth fault detector, lightning arrestors and field circuit isolator.
AES Sine Wave Output CCR-
2100S
|
AES Thyristor Type
CCR-2100
|
Control Systems
A range of expandable remote control systems for airports is available from AES.
Our AGL control system can satisfy the requirements of all type of airports from a simple CAT I system right through to a CAT III B with Advanced Surface Movement and Guidance Control System (A-SMGCS).
From the simplest configuration, with two Control Working Positions (CWP) and some remote modules (CLP) to control only CCRs (Constant Current Regulators) to the most complicated airfield, with many Runways and Taxiways and A-SMCGS needs.
The ALCMS is simply scalable and the modular software makes any improvement very simple and without risk for the final user.
The main component of the system are:
Our AGL control system can satisfy the requirements of all type of airports from a simple CAT I system right through to a CAT III B with Advanced Surface Movement and Guidance Control System (A-SMGCS).
From the simplest configuration, with two Control Working Positions (CWP) and some remote modules (CLP) to control only CCRs (Constant Current Regulators) to the most complicated airfield, with many Runways and Taxiways and A-SMCGS needs.
The ALCMS is simply scalable and the modular software makes any improvement very simple and without risk for the final user.
The main component of the system are:
- TWR Control Working Position (TWR CWP-WS), industrial PC based and Wide Screen display (WS)
- TWR CWP–TS with Touch Screen display (TS) sun readable based on transflective technology in order to better compensate the different light conditions
- Filed components (CLP) developed and built to exactly match the requirement of a demanding airfield. Every field component CLP is specialized to implement:
- CCR interfacing,
- Single lamp control and monitoring,
- Stop bar control,
- Guidance Signs control and monitoring,
- Runway Guard Lights control and monitoring
- Runway incursion detection (microwave sensors)
|
|
|
|